XS Scuba Phantom BCD Step It Up Dive Package
XS Scuba Phantom BCD
The Phantom is a high-quality, weight-integrated, back inflation BC.
The Phantom is available with XS Scuba’s proprietary PLUS lighting system. By having the complete air cell behind the diver, the front of the diver is left unobstructed and opened up. It is very easy to see your hardware and pockets. Its unique harness system eliminates the need for a hard pack by using the cylinder itself as the spine of the BC. This versatile harness can provide an exceptional fit from XXS thru XXL with just 4 sizes!
FEATURES
- The perimeter of the Phantom accepts XS Scuba’s proprietary PLUS lighting system
- Integrated Catch n' Release weight system is very easy to load, remains secure and easy to ditch
- The neutral colors of the Phantom allow the diver to accessorize with any color
- A clever harness system eliminates the need for a hard pack. The tank band has been lowered to integrate with the waistband. A valve retention strap pulls the top of the cylinder in towards your center of gravity. This relieves the shoulders and transfers the load to the hips. Your cylinder will seem lighter than usual, remain parallel to your back. The BC stays put, it will not slide down your back.
- Only 4 sizes are needed to fit a size range of XXS to XXL
- Optional trim weight pockets may be added to the tank band to increase weight capacity or provide optimal positioning in the water. See XS Scuba p/ns XXX, XXX, or XXX
- The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard schrader valves.
- Padded spine and lumbar provide back comfort
- Rolled neck collar protects the diver’s neck from abrasion
- 6 stainless steel D-rings provide many attachment options
- 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump and a lower, rear pull dump
- A chest strap provides added security
- Knife mounting grommets on the left side accommodate an XS Scuba BC knife
- The pull down right pocket will accommodate writing slates, small lights or a spare mask. The left pocket is ideal for the PLUS lighting battery pack or a pair of gloves
- A bladder retractor is used to pull in the sides of the bladder during deflation. This keeps unit streamlined and reduces drag.
XS Scuba Inspire Regulator
The Inspire is a high performance regulator.
It provides superior breathing and breathes dry in all positions. It breathes quietly and smoothly. It proves that you do not have to pay top dollar to get performance and features. The Inspire first stage regulator is a balanced diaphragm design means that the first stage delivers a consistent pressure regardless of cylinder pressure or depth. The result is consistent, easy breathing. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism.
The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. The Inspire first stage regulator is built from corrosion resistant chrome plated marine grade brass, has 4 low pressure (LP) ports that are built into a rotating turret to offer optimal hose routing. The regulator first stage has 2 high pressure (HP) ports allow for a transmitter as well as an analog back up pressure gauge. The first stage is compatible with EAN40 (40%) out of the box.
The Inspire second stage regulator offers top performance with external controls that allow for detuning when not in use. Second stage comes equipped with a 30" (76 cm) braided Miflex 3/8" threaded hose. Regulator is pneumatically-balanced for superior breathing performance. The Inhalation Control Knob adjusts the inhalation effort. The diver is able to adjust the regulator to a variety of environmental conditions.
FIRST STAGE FEATURES
- Chrome Plated Brass Body
- 4 LP Ports
- 2 HP Ports
- Low Pressure Port Rotating Turret for Optimal Hose Routing
- Balanced Diaphragm 1st Stage Design:
- Environmentally Sealed to Keep-Out Contaminates
- Delicate Internal Parts Not Exposed-to-Contaminants
- Requires Less-Maintenance
SECOND STAGE FEATURES
- Pneumatically-Balanced Valve: Superior Breathing Performance
- Top Performance with External Controls:
- Adjustable Dive/Pre-Dive Venturi Lever
- Venturi Controls Free Flow
- Great in Current
- Won't Free Flow when Not-in-Divers-Mouth
- Inhalation Control Knob
- Adjust Regulator to Variety of Environmental Conditions
- Dual-Material Silicone Mouthpiece: Durable Bite Tabs, Soft Against the Gums
- Silicone Front Cover: Easy Purging, Even While Wearing Thick Gloves
XS Scuba Inspire Octopus
Offers top performance with external controls that allow for detuning when not in use.
For the serious diver who believes that the octopus needs to perform as well as the primary second stage, the Inspire Octopus is for you. Hi-viz yellow front cover and 36" (91.5 cm) braided Miflex 3/8" threaded hose allows for easy identification in an emergency. Regulator is pneumatically-balanced for superior breathing performance. The Inhalation Control Knob adjusts the inhalation effort. The diver is able to adjust the regulator to a variety of environmental conditions.
FEATURES
- Hi-Viz yellow front cover and hose
- Pneumatically-balanced to provide superior breathing performance
- The inhalation control knob adjusts the inhalation effort
- An intedrated venturi lever allows the diver to turn off the venturi when the regulator is out of the mouth. This prevents unwanted freeflow
- The 36 inch Miflex braided hose is lightweight and pliable
Highland Miflex Pressure Gauge and Compass Combo
PRESSURE GAUGE FEATURES
- Chromed brass housing
- 0 to 5000 psi - 0 to 400 bar
- Luminescent gauge face
- Airspool with Viton o-rings
COMPASS FEATURES
- Highly accurate movement
- Tilt of up to 22 degrees
- Top and side reading
- Large ratcheting bezel
- Luminescent face
- Northern hemisphere
- Manufactured in Italy
HP HOSE FEATURES
- Miflex Carbon HD
- Braided outer layer
- 32" length